• facebook
  • googleplus
  • linkedin
  • twitter
  • youtube


ELECTROVALVE COAXIAL KIT, used for 9020/9030/S4/S7/S8

Material: PP, High Resistant to Corrosion Stainless Steal

It is an industrial device that uses electromagnetic control. It is an automation basic component for controlling fluids. It is used to adjust the direction, flow rate, speed and other parameters of the media in the industrial control system. Solenoid valves can be combined with different circuits to achieve the desired control, and the control accuracy and flexibility can be guaranteed.


There are many kinds of solenoid valves. Different solenoid valves play a role in different positions of the control system. The most commonly used ones are check valves, safety valves, directional control valves, and speed control valves.
There are closed chambers in the solenoid valve. There are through holes in different positions. Each hole is connected to a different oil pipe. The middle of the cavity is the piston. The two sides are two electromagnets. Which side of the magnet coil energizes the valve body and is attracted to Edge, by controlling the movement of the valve body to open or close different oil discharge holes, and the oil inlet hole is normally open, the hydraulic oil will enter a different drain tube, and then through the pressure of the oil to push the piston of the cylinder, the piston again Drive the piston rod and the piston rod drives the mechanical device.

This controls the mechanical movement by controlling the on and off of the electromagnets.

If you are interested in it,  I would be pleased to supply you further information.



Post time: May-24-2018